Glass Lifter Mounted on Forklift
Designed to mount on the front fork of forklifts or other lifting equipment, adopt vacuum to hold the loads, moved and transported by mobile forklifts, with tilt and/or rotation movements for handling.
If there is no overhead crane or gantry in the plant or warehouse, it is a good choice to use this lifter mounted on forklifts or stackers for transporting and handling glass panel. Also it can load and unload glass onto/from the trucks.
In the construction site, it can design to mount on the truck cranes or spider cranes for handling and installing glass and glazing.
- Use mechanical attachment for mounting on forklift and other mobile lifting equipment.
- Employ DC power with chargeable batteries, no cable connection required.
- Customized design and produce as per actual usage and application.
- Enough working hours benefit from the qualified batteries and energy saving system.
- Remote control keeps the operator in safe position
|Load Capacity||Up to 1500 kg|
|Vacuum Pad||Round, 250mm/300mm diameter, with mounted spring base; Silicone material
Number as per load dimension and weight
|Mechanism||Structural attachment assembled and mounted on forklift or other handling equipment|
|Working Power||DC power, 12 volts / 24 volts|
|Vacuum||Single vacuum circuit or dual vacuum circuits as required|
|Max. Glass Size||Depending on the dimension of the suction frame and glass thickness, suggested up to 2,400 x 5,000 mm|
|Hoist Device||Forklifts or any other lifting equipment|
|Vacuum Holding Time||> 10 minutes after power loss|
|Tilt Capability||90°, manual/motorized/hydraulic|
|Rotation Capability||Not required, or
|Safety Protection||Closed non-return circuits
Vacuum compensation system
Acoustic and optical alarm (option)
|Control||Wired remote or radio remote|
|Extension Arm||With / without, as required|